loading

Jianlong Plastic－32 Years Specializing in Customized Processing of Plastic Pipes and Fittings.
English English
Português Português
Pусский Pусский
Français Français
العربية العربية
Español Español
Home
Products
PVC-U Pipes And Fittings
PP-R Pipes And Fittings
HDPE Pipes
Service
Solution
Ground snow melting project
Real estate engineering
Coal Mine
Chemical Plants And Agricultural Irrigation
Municipal Engineering
Communications And Power
Schools and hospitals
Oil and gas fields
About Us
Development History
Our Certifcations
Contact Us
Video
Resource
Cases
News
FAQ
English

During construction in cold regions, how to prevent low-temperature brittleness and ensure the quality of heat fusion joints for HDPE pipes?

2025-12-16
High-quality HDPE water supply pipes inherently possess good low-temperature impact resistance (capable of passing -40°C drop weight impact tests). For construction in extremely cold environments, we recommend:
1. Using insulated tarps to cover pipes during storage and allowing them to acclimate indoors for 24 hours before installation.
2. Using hydraulic heat fusion welding machines with automatic temperature compensation and increasing the heating temperature by 10-15°C.
3. Extending the heating and cooling times (refer to our provided "Winter Construction Parameters Table").
4. Wrapping the completed joint with insulation to allow for slow cooling.
Jianlong's HDPE pipes are produced using PE100 compound materials, with a low-temperature embrittlement point below -70°C. We also provide on-site technical guidance for major projects, ensuring a first-pass qualification rate for PE pipe welding exceeding 99.5%.
prev
How to correctly select the specifications and pressure ratings for PP-R pipes and PVC-U pipes in building projects?
Can you detail the standard operating procedure and quality control points for PE pipe heat fusion (Butt Fusion)?
next
Related questions
1
Can you provide OEM production for HDPE pipes and PVC fittings for municipal projects or building material distributors?
With over 30 years of experience in plastic pipe OEM/ODM services, we offer comprehensive white-label solutions for municipal contractors and building material chains. Specific services include: producing HDPE double-wall corrugated pipes to custom diameters based on your engineering standards; embossing your brand logo on PVC-U drainage pipe surfaces; adjusting the antibacterial formulation of PP-R pipes according to regional water quality; even developing exclusive colors of PE-RT heating pipes for your HVAC company.

All OEM plastic pipes use raw materials of the same grade as our "Jianlong" brand products, sharing the ISO9001 Quality Management System and annual SGS factory audit supervision. Please submit your technical parameter sheet for MPP power pipes or PE irrigation pipes, and we will provide a sampling plan within one week.
2
What packaging standards are used for exporting HDPE pipes and PVC fittings? Can eco-friendly packaging be customized?
Our plastic pipe export packaging strictly follows ISTA international transport standards. HDPE double-wall corrugated pipes are bundled with steel straps and UV-resistant stretch film, with high-strength plastic end caps. PVC-U drainage pipes and PP-R pipes are packed in custom cartons or on wooden pallets with inner waterproof PE liners. Small-diameter PE irrigation pipes can be coil-packed and covered with shrink film.

All packaging is marked with the product name (e.g., HDPE Water Pipe), ISO9001 certification logo, and international symbols like "Keep Dry." Responding to environmental needs, we offer biodegradable stretch film and FSC-certified recycled wood pallets for PE pipe transport. If you require your company logo printed directly on PVC fitting bags, we support customization and can provide packaging material tests certified by SGS.
3
What are the lead times for HDPE water pipes, PVC-U fittings, and PE-RT underfloor heating pipes?
As a one-stop plastic pipe supplier, lead times vary by product type and order size. Standard specifications of HDPE water pipes (DN20-DN500) are typically available from regular stock within 7-10 days, while batch production requires 25-35 days. The mold-based production cycle for PVC-U drainage pipes and fittings is 30-45 days.

PE-RT underfloor heating pipes (with oxygen barrier) require dedicated production lines, with a lead time of approximately 40-50 days. For initial orders of MPP power pipes or custom-sized HDPE double-wall corrugated pipes, involving raw material procurement and process setup, we recommend allowing 60 days. During peak seasons (e.g., concentrated municipal project procurement), lead times may extend by 10-15%.
4
If quality problems occur with purchased HDPE double-wall corrugated pipes or PVC-U drainage pipes, how are they handled?
For HDPE double-wall corrugated pipes used in municipal drainage projects or PVC-U drainage pipes used in construction, we implement a full lifecycle quality commitment. Once a defect is confirmed to originate from our production process (e.g., uneven wall thickness, incomplete fusion line), we activate an emergency protocol. This involves quarantining and tracing the problematic batch of PE pipes.

Simultaneously, based on your project schedule, we prioritize replacement production or allocate stock from nearby warehouses (for standard products like HDPE water pipes and PE-RT heating pipes). For already installed PVC fittings, we provide on-site technical repair guidance. We will compensate for direct losses caused by confirmed plastic pipe quality issues according to the purchase contract and third-party assessment. A root cause analysis report will be submitted to you to ensure similar issues do not recur in other product lines like PP-R pipes or MPP cable conduits.
5
How to obtain samples of HDPE pipes, PVC-U fittings, or PP-R pipes?
As a professional plastic pipe manufacturer, we encourage clients to verify product quality and suitability through samples. You can test the ring stiffness of our HDPE pipes, the corrosion resistance of our PVC-U pipes, and the heat fusion performance of our PP-R pipes. Samples are provided free of charge, offering a tangible evaluation opportunity for PE pipes, PVC fittings, or PE-RT heating pipes.

The client is responsible for international shipping costs from our factory to the destination. If you place a formal order after testing samples of MPP power pipes or PE irrigation pipes, we can deduct this freight cost from your first order. Please contact us via the official website email or WhatsApp, specifying the plastic pipe model, specifications (e.g., DN110 HDPE double-wall corrugated pipe), and intended use. We will then arrange shipment.
6
Besides traditional products, what innovations does your company have in new smart or eco-friendly pipes?
We continuously pursue product innovation:
1. Smart Pipes: Developing HDPE water supply pipes integrated with leakage monitoring optical fibers for real-time perception of pipeline network status.
2. Eco-friendly Products: Introducing high-impact resistant and quiet PVC-U drainage pipes (10 dB noise reduction compared to standard pipes) and PE protection pipes made from biodegradable materials (for temporary works).
3. System Solutions: Providing prefabricated pumping stations (with HDPE tanks) and sponge city infiltration drainage systems (using HDPE perforated drainage pipes). All innovative products are detailed in the "Product Center" on our official website. You can also directly contact our Innovation Division for the latest technical whitepapers.
no data
GET IN TOUCH WITH Us

The company has a comprehensive range of products and a complete range of pipes and fittings, and can provide customers with one-stop, all-round pipeline customization and production and sales supply.

Contact Us

Contact: Manager Wang

Tel: +86 17860052961

E-mail: jianlongplastic@gmail.com

Address: Jinger Road, Jiaoshan Town, Ju County, Rizhao City, Shandong Province
Copyright ©  Shandong Jianlong Plastic Co., Ltd. - www.jianlongplasticpipe.com | Sitemap | Privacy Policy
Product Lives
Contact us
Customer service
detect